Royal Excelsior 2 User Manual download pdf (Page 26)

2. Make sure the appropriate software is installed and running on your

computer. Detailed instructions are provided with the PC link software

package.

3. Touch the [pc link] key and then touch [OK] to start synchronization.

Display will show 'Synchronizing…’

4. When synchronization is complete, the display will show ‘Successful

Synchronization!’ and return to Home Time mode.

CHANGING BATTERIES

The main batteries need to be changed when the “low battery” warning

message appears on the display. To change the batteries, do the

following:

1. Turn off the unit.

2. Use a screwdriver to remove the single screw holding the battery door

in place on the backside of the unit. Then remove the battery cover.

3. Remove every battery gently by pushing the stylus under the battery.

Replace old batteries with fresh CR-2032 batteries.

4. Replace the battery door. Use the screwdriver to position the battery

cover screw back into place.

5. Skip the RESET to prevent loss of previously stored data. Verify

correct time settings.

Note: Replace the batteries once every six months to ensure proper

battery power.

WARNING

THIS UNIT USES CR2032 LITHIUM BATTERIES.

“CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME TYPE BATTERIES

RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED

BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.”

1 2 ... 21 22 23 24 25 26

No comments

Royal Excelsior 2 User Manual Page 26